|
Product Details:
|
| Product Name: | Analog Proximity Sensor | Voltage: | 18-30VDC |
|---|---|---|---|
| Material: | Brass With Nickel | Mounting Way: | Flush Or Non-flush |
| Output: | 0-10VDC | Connect Way: | M12 4 Pin Plug |
| High Light: | Analog Inductive Proximity Sensor 30V,18V Analog Inductive Proximity Sensor,M18 inductive proximity switch sensor |
||
M18 Analog Inductive Proximity Sensor With 0-10V Voltage Output With M12 4 Pin Plug Connection
Product description :
Series : M18 Analog Inductive Voltage output sensor
Size : M18*80-M12
Housing Material : brass nickel plated
Mounting : shielded/Non-shielded
Sensing Distance Sn(mm) : 5mm/8mm
Operating Voltage : DC 18-30V
Output function : 0-10V
Protection Category : IP67
connection : M12 4 pin connector
Specification of the sensor :
| DC 3 wire M18 Analog Inductive Voltage output sensor with connector | |||
| Size | M18*79mm-M12 | ||
| Mounting | Shielded | Non-shielded | |
| Sensing Distance Sn(mm) | 1.0-5.0mm | 1.0-8mm | |
| Housing Material | Brass nickel plated | ||
| With or Without LED | Without LED | ||
| Operating Voltage | 18-30VDC | ||
| Ripple | <10% | ||
| No Load Current | <15mA | ||
| Output Voltage/Load Resistor | 0-10VDC/ >4.7KΩMax. | ||
| Linearity | <5%(Sr) | ||
| Repeat Accuracy | 0.02mm | ||
| Ambient Temperature | -25°C - +70°C | ||
| Temperature Drift | <5%(Sr) | ||
| Short Circuit Protection | - | ||
| Reverse Polarity Protection | YES | ||
| Protection Degree | IP67 | ||
| Switch Frequency Max. | 100Hz | ||
| Time Delay Before Availability | - | ||
| EMC | RFI>3V/M / EFT>1KV / ESD>4KV(contact) | ||
| Shock/Vibration | IEC 60947-5-2,Part 7.4.1 / IEC 60947-5-2,Part 7.4.2 | ||
| Material Active Face | PBT | ||
| Connection | With M12 4pin connector | ||
| Inductive Voltage Output | I1B18*GV-M12-82C-0-10V | I2B18*GV-M12-82C-0-10V | |
Friendly reminder about the sensor :
1.There are two types of proximity switches, flush and non-flush. If the mounting bracket is made of metal, the shell of the non-flush switch must be exposed to a certain length during installation. For flush installation, no exposure or only a small amount of exposure is required. If installed side by side, There must be a certain interval between the switches. The specific interval is subject to no interference after installation. If the mounting bracket is non-metal, then there is no installation limit on the distance to find the object.
2.The factory inspection standard of the inductive proximity switch is a 1mm thick square Fe37 iron sheet. The detection distance in actual application will vary with the material of the object to be tested.
Relevant information about the service :
Shipping ways :
Our normal shipping way is internation express, such as DHL,FEDEX, TNT and so on;
When the gross weight is over 45kg, air trnasportation is also a good way for the customers to save some cost;
Sea transportation is also can be considered, but only appointed agent accetpable.
Payment term :
1. Generaly speaking, 30% deposit in advance, balance paid before the shipping;
2. Sometimes the paypal payment method is also ok if the total amount is less than 500USD, such as sample fee;
Delivery time :
The sensors will be shipped out in 3 days when we receive the payment if we have stocks;
If no stocks, the delivery time will be 7-10days when we received the PO or deposit.
After-sales services :
1. The warranty period is 12 months
2. If we send the wrong parts to you, free replacement will be available
3. As for the installation of the parts. if you have any questions, please do not hesitate to contact us at any time.
Contact Person: Anna
Tel: 18925543310
